Download datasheet
Download Utility CD

BLUEBERRY LE UHF

  • RFID reader and writer
  • EPC Class1 Gen2
  • USB interface – Bluetooth® Low Energy 4.1
  • Bidirectional serial emulation profile
  • Automatic reading of EPC or EPC + TID or other combinations
  • Output ASCII / HEX with prefix and suffix
  • Battery life up to 10000 readings
View technical features
MAN/MACHINE INTERFACES 1 function key for RFID read activation, Multitone Beeper, 2 LED for device operation signaling
INTERNAL DEVICES Frequency: 13.56 MHz
Power: 200 mW
Standard: ISO 15693, ISO 14443-A (only reading)
Reading distance: up to 30 cm
Embedded antenna
INTERFACES Micro USB type B
Bluetooth® Low Energy
OS COMPATIBILITY iOS, Android, RIM, Windows Mobile/Phone, Windows, masOS, Linux
PROCESSOR Texas Instruments MSP430 (16 bit RISC a 16MHz)
POWER SUPPLY USB powered: 380mA peak @ 5Vdc (RF active full power), 30mA @ 5Vdc (idle mode)
Battery powered: Li-Poly Battery 3.7 Vdc 300mAh, rechargeable via micro USB, battery life 10000 reading, 14 h in idle mode
WORKING TEMPERATURE -20°C / 60°C
DIMENSIONS Height 6.8 cm – Width 4.2 cm – Depth 1.8 cm
WEIGHT 30 g
PROTECTION DEGREE IP54

BlueBerry LE UHF is a mobile mini RFID reader, keychain shape, able to read UHF tags and transmit the acquired data to any device equipped with Bluetooth® Low Energy radio interface.

The maximum reading distance is 30 cm for UHF far field tags and 2 cm for near field UHF tags.

The use of the RFID reader is easy and intuitive thanks to the presence of a single button, to activate the reading of the UHF tags (1), and an LED and a multi-tone beeper, to alert the operator of the reading.

BlueBerry LE UHF integrates Bluetooth® Low Energy radio technology, in particular it uses the serial emulation profile, a two-way channel. A simple serial communication protocol, present on all TERTIUM Technology products, allows to manage all the RFID reader functions, in particular the ID scan and the reading / writing of the UHF tag memory (2).
With this profile it is possible, in the development phase, to integrate RFID technology in any application or program for mobile devices with an iOS and Android operating system (3).

BlueBerry LE UHF is battery powered. Charging carries out via a micro USB connector.

Through the USB port it is possible to connect the BlueBerry LE UHF to a PC, so that it can also be used as a normal RFID desktop reader. Data transmission on the USB interface takes place in virtual serial mode, a bidirectional channel (managed through the same serial communication protocol as the Bluetooth® Low Energy interface).